Cabletron Systems 6H122-16 - Manual (Page 146)

Chapter 5: Local Management
5-106 6H122-16 User’s Guide
soft_reset:
Syntax: soft_reset
Description: This command restarts the software image,
which restores the user configuration settings
from NVRAM. The user will be queried to
confirm the reset command to ensure against
unwanted resets.
Options: Not Applicable
Example:
telnet:
Syntax: telnet [IP address]
Description: The telnet command allows the user to
communicate with another host (that supports
Telnet connections) using the Telnet protocol.
The user must specify the remote host using its
IP address. The [IP address] field is mandatory.
If no Port number is specified, telnet will
attempt to contact the host at the default port.
Options: Not Applicable
Example:
!
CAUTION
The Network Tools connection to the module will be terminated
upon execution of this command.
-> soft_reset
RESET: Are you *SURE*? -> Y
174266
-> telnet 134.141.12.345
Trying 134.141.12.345
Connected to 134.141.12.345
SunOS UNIX (server1)
login: