Mode switch bank settings, B.1 required tools, B.2 setting the mode switch – Cabletron Systems 6H122-16 User Manual
Page 151: Appendix b, Section b.2, To reestab, Er to, Appendix b mode switch bank settings
6H122-16 User’s Guide
B-1
APPENDIX B
MODE SWITCH BANK SETTINGS
This appendix covers the following items:
•
)
•
Locations, functions, and settings for the mode switches (
)
B.1
REQUIRED TOOLS
You need the following tools to perform the procedures provided in this
appendix:
•
Antistatic wrist strap (provided with 6C105 chassis)
B.2
SETTING THE MODE SWITCH
These switches are set at the factory and do not need to be changed unless
you intend to perform the following:
•
Force download a new image file from a BootP server.
•
Clear NVRAM and restore all user-entered parameters such as the IP
address and Subnet Masks to the 6H122-16 “Default” configuration
settings.
•
Clear user-entered passwords stored in NVRAM and restore the
default passwords.
!
CAUTION
The 6H122-16 is sensitive to static discharges. Use an
antistatic wrist strap and observe all static precautions during
this procedure. Failure to do so could damage the 6H122-16.