Cabletron Systems 6H122-16 - Manual (Page 115)

Flash Download Screen
6H122-16 User’s Guide 5-75
To access the Flash Download screen from the Module Specific
Configuration screen, use the arrow keys to highlight the FLASH
DOWNLOAD menu item and press ENTER. The Flash Download screen
displays.
Figure 5-31 Flash Download Screen
The following briefly explains each field of the Flash Download screen:
Download Method (Selectable)
This field steps through TFTP, RUNTIME and BOOTP. If set for BOOTP,
the module sends out a BootP request to determine the IP address of the
TFTP server and the filename of the image to be downloaded. If set for
TFTP or RUNTIME, the 6H122-16 attempts a TFTP download based on
the IP address and filename entered in the fields at the bottom of the Flash
Download screen.
Section 5.22.1 describes how to download using TFTP.
NOTE
Download Server IP and Download Server Filename are
displayed only when TFTP or RUNTIME are selected in
Download Method.
Firmware Revision: XX.XX.XX
Flash Download
Download Method:
Reboot After Download:
TFTP Gateway IP Addr:
Last Image Server IP:
Last Image File Name:
Download Server IP:
Download File Name:
BOOTPROM Revision: XX.XX.XX
[TFTP]
[YES]
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
/tftpboot/6H122.hex
XXX.XXX.XXX.XXX
/tftpboot/6H122.hex
Module Type: 6H122-16
Slot Number: X
EXIT
2361_24
6C105 LOCAL MANAGEMENT
TFTP DOWNLOAD. WILL COMMIT TO FLASH. REBOOT IN PROGRESS...
RETURN EXECUTE