Improving print quality, Error messages listing, Setting a higher print quality level – Dell 928 All In One Inkjet Printer User Manual
Page 66
Size Warning
The size of the paper
inserted is less than that
selected.
Press Select to continue
or press Cancel to go
back and retry operation.
The size of the paper in the printer is less than that
selected.
Modify the paper size so that it corresponds
with the size of the paper loaded in the printer,
or press the Select button
to continue
printing.
Ink level error
The cartridge is low on ink. This type of message is
displayed when the level of ink remaining in the
cartridges reaches: 15 percent, 10 percent and 5
percent.
Replace the ink cartridge. For more
information, see "
Only one peripheral or
memory card allowed.
Remove all the others.
More than one memory card or memory device has
been inserted into the printer.
Remove all the memory cards or devices.
Improving Print Quality
If the print quality of the documents is not satisfactory, there are various ways of improving it.
Use an appropriate type of paper. For example, if you are printing photos using a photo cartridge, use Dell Premium photo
paper.
Use thicker, white or coated paper. For printing photos, use Dell Premium photo paper.
Select a higher print quality level.
If there is no improvement in print quality, try:
Cleaning the ink cartridges. For more details see "
Cleaning the Ink Cartridge Nozzles
".
Aligning the ink cartridges. For more details see "
Setting a higher print quality level.
Setting a Higher Print Quality Level
To select a higher print quality level:
1. With the document open, click on Fileg Print
The Print dialogue is displayed.
2. Depending on the program or operating system you are using, click on Preferences, Properties or Options.
3. In the Paper/Quality tab, select the highest quality level.
4. Print the document again.
For more solutions, visit the Dell support web site at support.dell.com.
Error Messages Listing
The following table describes the possible error messages that can appear on the printer display or on the computer
screen.
Error Code
Operator Display
Message
Description
Solution
302
Memory Error. Call Dell.
Error detected in reading or writing NVRAM. Call the Dell Support Center.