Dell 928 All In One Inkjet Printer - Manual (Page 22)

4. In Setup mode, use the Arrow buttons to highlight Bluetooth Default Settings and press Select . The
Bluetooth sub menu is displayed.
5. To enable Bluetooth connectivity, use the Arrow buttons to highlight Bluetooth then use the Arrow buttons
to highlight Enabled and press Select .
6. To enable Discovery Mode, use the Arrow buttons to highlight Discovery Mode in the menu, then use the
Arrow buttons to highlight Enabled and press Select .
7. To set the Security level, use the Arrow buttons to highlight Security in the menu, then use the Arrow buttons
to select the security level you want.
NOTE: If you select High for the Security level, you must also specify the Passkey option which is the password that
must be entered on the device to access the USB Bluetooth adapter, and therefore the printer's Bluetooth connectivity,
and printing functions.
8. Press the Back button to save your settings and return to the previous menu. The printer is now ready to accept
print requests from Bluetooth-enabled devices.
Setting Up a Bluetooth-Enabled Device to Send Print Requests
To set up a Bluetooth-enabled device to connect to the printer refer to the device's documentation. In particular, you
must set the Device Name or the Device Address of the USB Bluetooth adapter connected to the printer. As not all
devices display this information automatically, you can access these settings on your printer from the Bluetooth
menu, by selecting Bluetooth Default Settings in Setup mode, and then either Device Name or the Device
Address.
After completing the set up procedures, you can send a print request following the instructions in your device's
documentation.
Enter Passkey
If a passkey has been set (that is, the Security level has been set to High), you must enter the passkey on your
Bluetooth device before the printer accepts print requests from your device. This is 0000 by default. You can view and
modify the passkey by selecting Passkey in the Bluetooth sub menu. For more information, see "Changing Default
Bluetooth Settings".
NOTE: During printing operations, do not remove the USB Bluetooth adapter from the printer or move the printer, as either
action could cause data to become corrupted.
Even if low Security is Chosen, certain client systems such as Windows XP (in SPP mode) may impose a passkey
exchange, therefore you need to be prepared to use the passkey in any case.
Interrupting a Print Operation
To interrupt a print operation, you can:
Press the Cancel button on the printer. This cancels the current printing operation.
Press the Power button on the printer. This cancels the current printing operation, terminates the Bluetooth
connection and switches off the printer.
Setting Up Bluetooth Printing on Your Computer
To print using a Bluetooth on your computer: