Setting up your printer, Setting the language – Dell 928 All In One Inkjet Printer User Manual
Page 6
Number Part
Description
1
Paper feeder Part that supports the loaded paper.
2
Paper guide
Guide that helps the paper feed into the printer properly.
3
Top cover
Upper cover of printer that holds your document or photograph in place while you scan it.
4
Paper output
tray
Tray that holds the paper output by the printer.
NOTE:
To extend the paper output tray, pull the tray out and flip out the extender.
5
Scanner unit Unit you lift to gain access to the ink cartridges.
6
Ink cartridge
storage
garage
Unit you use to store an unused black or photo ink cartridge.
7
Ink cartridge
carrier
Carrier that holds two ink cartridges, one colour and the other black or photo. For more information on
your cartridges, see "
8
Scanner
support
Part under the scanner unit that keeps the printer open while you change ink cartridges.
NOTE:
To close the printer and resume normal operations, lift the scanner unit, push the scanner
support towards the front of the printer, then lower the scanner unit until it rests on the main body of the
printer.
9
Power
connector
Slot into which you plug the power cable.
NOTE:
Insert the power cable into the printer before connecting the power cable to the wall socket.
10
USB
connector
Slot into which you plug the USB cable (sold separately). The other end of the USB cable is connected
to your computer.
11
Memory card
slots
Slots for inserting media cards containing digital pictures.
12
USB port or
PictBridge
port
Slot for plugging a USB memory pen or USB cable (sold separately) that connects your printer to a
PictBridge-enabled camera. For more information, see "
Printing Photos from a PictBridge-Enabled
13
Scanner
glass
Surface on which to place your document or photo face downwards for copying or scanning.
14
Operator
panel
Panel on the printer for controlling copying, printing and scanning. For more information, see "
Setting Up Your Printer
NOTE:
The following operating systems are supported: Windows 2000 with Service Pack 4, 32-bit Windows XP with Service
Pack 2, 64-bit Windows XP with Service Pack 1, 32-bit Windows Vista™ and 64-bit Windows Vista™.
Follow the instructions in the Setting Up Your Printer diagram to install the hardware and software. If you encounter
problems, see "
Setting the Language
Follow these instructions to set the language on your printer:
1. When you first power on your printer, press the Arrow buttons
on the operator panel to highlight the Setup option
in the Main menu, then press the Select button
. The Setup sub menu is displayed.
2. Press the Arrow buttons
to highlight Language.