Dell Compellent Series 30 - Manual (Page 8)

2 Storage Center System Setup Guide
Getting Started
System Power Up
Power on the system by pressing the power switches in the following order.
1 Power up each enclosure. Simultaneously press the two power switches on the rear of
each enclosure.
2 Wait several minutes until the drives spin up.
3 After all drives in the enclosure spin up, power up each controller by pressing the power
button on the front of the enclosure.
Note Always power up disk drive enclosures before powering up the controllers.
After powering on the Storage Center, go to Setting Up the Storage Center on page 3 to
continue the setup.