Dell Studio XPS 435T / 9000 (Early 2009) - Manual (Page 39)

Back to Contents Page
Replacing the Top Cover
Dell Studio XPS™ 435T/9000 Service Manual
1. Follow the procedures in Before You Begin .
2. Remove the computer cover (see Replacing the Computer Cover ).
3. Remove the front panel (see Replacing the Front Panel ).
4. Remove the two screws that secure the top cover to the computer.
5. Disconnect the cables from the top I/O panel.
6. Pull the release tab with one hand and slide the top cover away from the chassis.
7. Disconnect the power LED cable from the top cover.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at ww.dell.com/regulatory_compliance.
1 top cover 2 screws (2)
3 I/O panel cables
1 power LED cable 2 release tab