Dell Latitude X300 - Manual (Page 97)

11. Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet.
12. Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the system configuration information.
To confirm the amount of memory installed in the computer:
l In the Microsoft® Windows® XP operating system, click the Start button, click Help and Support, and then click Computer Information.
l In Windows 2000, right-click the My Computer icon on your desktop, and then click the General tab.
Adding a Modem
1. Ensure that the work surface is flat and clean to prevent scratching the computer cover.
2. Save and close any open files, exit any open programs, and then shut down the computer.
3. If the computer is connected to a media base (docked), undock it. See the documentation that came with the media base for instructions.
4. Disconnect the computer from the electrical outlet.
5. Wait 10 to 20 seconds and then disconnect any attached devices.
6. Remove any installed PC Cards or blanks, battery, and devices.
7. Turn the computer over and loosen the two captive screws on the modem cover, and remove the cover.
1 captive screw (2)
2 memory module cover
CAUTION: Before working inside your computer, read the safety instructions in your System Information Guide.
NOTICE: Handle memory modules by their edges, and do not touch the components on a module. Ground yourself by touching a metal connector on the
back of the computer, and continue to do so periodically during this procedure.