Dell PowerEdge SC1430 User Manual
Page 12

12
About Your System
5
USB connectors (2)
Connects USB 2.0-compliant devices to the system.
6
power button
The power button controls the DC power supply output to the system.
NOTE:
If you turn off the system using the power button and the system is
running an ACPI-compliant operating system, the system performs a
graceful shutdown before the power is turned off. If the system is not
running an ACPI-compliant operating system, the power is turned off
immediately after the power button is pressed.
7
power light
No light — The system is off.
Steady green — The system is powered on.
Steady amber — The power supply is probably good. Check the
diagnostic indicators to see if the specific problem is identified. See
"Diagnostics Indicator Codes" on page 15.
Blinking amber — The system is powering up.
• If the hard-drive indicator is off, the power supply may need to be
replaced.
• If the hard-drive indicator is on, the system board is faulty. Check
the diagnostic indicators to see if the specific problem is identified.
See "Diagnostics Indicator Codes" on page 15.
8
network link light
Lights when the system is linked to a network.
9
diagnostic lights (4)
Display light-pattern codes to assist in troubleshooting system
problems. See "Diagnostics Indicator Codes" on page 15.
Table 1-2.
Front-Panel Components (continued)
Item
Component
Icon
Description
book.book Page 12 Monday, June 5, 2006 1:51 PM