Dell PowerEdge SC1430 - Manual (Page 84)

84
Installing System Components
Figure 3-26. Removing and Installing the Card Fan
7 Disconnect the front fan cable from the FAN_FRONT connector on the system board. See Figure 6-2.
8 Remove the cables from the channel at the bottom of the front fan assembly.
9 Unscrew the fan case and lift to remove the front fan assembly from the system. See Figure 3-27.
10 Perform the preceding steps in reverse order to reinstall the fans.
1 card fan 2 card fan cable 3 card fan system-board
connector (FAN_CCAG)
4 front fan 5 full-length card retainer
3
5
2
1
4
book.book Page 84 Monday, June 5, 2006 1:51 PM