Dell PowerEdge SC1430 - Manual (Page 94)

94
Installing System Components
6 Install the expansion cards and connect any cables. See "Installing an Expansion Card" on page 70.
7 Connect the cables that you removed in "Removing the System Board" on page 91. See Figure 6-2.
8 Reinstall the card and front fans. See "Replacing the Card and Front Fans" on page 83.
9 Rotate the hard-drive carrier back into the system. See "Rotating the Hard-Drive Carrier Into the
System" on page 46.
10 Close the system. See "Closing the System" on page 43.
11 Reconnect the system to the electrical outlet, and turn on the system.
book.book Page 94 Monday, June 5, 2006 1:51 PM