Dell PowerEdge 7250 - Manual (Page 20)

BIOS POST Error Codes and Messages SR870BN4 Error Reference Guide
Revision 1.0 14
Error Code Error Message Pause on Boot Recommended User Action
0145 PCI ROM not found Yes It can mean valid option ROM
bar present, but no actual
physical option ROM present.
Informative, no user action
required.
0146 Insufficient Memory to Shadow
PCI ROM Yes This is due to lack of option
ROM space in the BIOS. This
error can be resolved by
disabling all of the option ROMS
on all devices except for the boot
device.
8100 Processor 01 failed BIST Yes; user input required Replace Processor 01.
8101 Processor 02 failed BIST Yes; user input required Replace Processor 02.
8102 Processor 03 failed BIST Yes; user input required Replace Processor 03.
8103 Processor 04 failed BIST Yes; user input required Replace Processor 04.
8110 Processor 01 Internal error(IERR) Yes; user input required Processor signal , read by BMC
and BIOS gets the information
from BMC. Indicates hardware
failure. User should replace
processor.
8111 Processor 02 Internal error(IERR) Yes; user input required Processor signal read by BMC
and BIOS gets the information
from BMC. Indicates hardware
failure. User should replace
processor.
8112 Processor 03 Internal error(IERR) Yes; user input required Processor signal read by BMC
and BIOS gets the information
from BMC. Indicates, hardware
failure. User should replace
processor.
8113 Processor 04 Internal error(IERR) Yes; user input required Processor signal read by BMC
and BIOS gets the information
from BMC. Indicates hardware
failure. User should replace
processor.
8130 Processor 01: Disabled Yes; user input required Retest processor. If error
persists, Replace processor 01.
8131 Processor 02: Disabled Yes; user input required Retest processor. If error
persists, Replace processor 02.
8132 Processor 03: Disabled Yes; user input required Retest processor. If error
persists, Replace processor 03.
8133 Processor 04: Disabled Yes; user input required Retest processor. If error
persists, Replace processor 04.
8140 Processor 01: failed FRB level 3
timer Yes; user input required Retest processor. If error
persists, Replace processor 01.
8141 Processor 02: failed FRB level 3
timer Yes; user input required Retest processor. If error
persists, Replace processor 02.
8142 Processor 03: failed FRB level 3
timer Yes; user input required Retest processor. If error
persists, Replace processor 03.
8143 Processor 04: failed FRB level 3
timer Yes; user input required Retest processor. If error
persists, Replace processor 04.
8150 Processor 01: failed initialization
on last boot Yes; user input required Retest processor. If error
persists, hardware failure. User
should replace processor.