Dell LCD TV W4201C - Manual (Page 37)

Troubleshooting Problems With Your TV 37
FILE LOCATION: D:\manual\Dell\W4201OM\approval-B\ch5e.fm
DELL CONFIDENTIAL – PRELIMINARY 12/28/05 – FOR PROOF ONLY
w
w
w
.d
el
l.
co
m
|
s
up
po
rt
.d
el
l.
co
m
Nothing appears on my TV
1
Ensure the TV is turned on.
2
Verify that all the cables are properly connected to the TV,
including the power cable.
3
Check to see if there is a blue or amber light on the lower, right-
hand corner of the TV. A blue light indicates the TV is on. An
amber light, means the TV is in power save mode.
4
Ensure the proper source is selected in the Input Source menu.
See "Input Select" on page 28 for more information.
5
Reconnect any devices that are currently connected to the TV. If
you are using multiple devices, connect and test one device at a
time.
6
Connect another device that you know is working properly.
7
Reset the original factory defaults. Press Menu on the remote
control, select Setup, and then select Factory Reset.
Problem Possible Solution
DZ101_UM-ALL.book Page 37 Wednesday, December 28, 2005 6:43 PM