Dell Precision T5400 (Late 2007) - Manual (Page 32)

32 About Your Computer
4 Remove the drive panel (see "Removing the Drive Panel" on page 233).
5 Prepare the computer’s new drive panel by adding or removing inserts as
needed (see "Drive Panels" on page 233).
If spare screws are attached to the old drive panel, you may transfer them
to the new drive panel.
6 If metal shields are present in your computer (see "About the Metal
Shields Present in Some Drive Configurations" on page 207), pull to
remove any metal shields from the optical bays or, in tower mode only,
from the FlexBay.
1 spare card retainer 2 card fan
1
2