Processor, Removing the processor – Dell Precision T5400 (Late 2007) User Manual

Page 179

Adding and Replacing Parts

179

11 Replace the computer cover (see "Replacing the Computer Cover" on

NOTICE:

To connect a network cable, first plug the cable into the network device

and then plug it into the computer.

12 Connect your computer and devices to electrical outlets, and turn them

on.

13 Enter the system setup program (see "System Setup" on page 89) and

restore the settings that you recorded in step 1.

14 Properly dispose of the old battery. For more information, see your Product

Information Guide.

Processor

CAUTION:

Before you begin any of the procedures in this section, follow the

safety instructions in the

Product Information Guide.

CAUTION:

To guard against electrical shock, always unplug your computer from

the electrical outlet before opening the cover.

NOTICE:

To prevent static damage to components inside your computer, discharge

static electricity from your body before you touch any of your computer’s electronic

components. You can do so by touching an unpainted metal surface on the

computer.

Removing the Processor

3 Rotate the hard-drive carrier out of the computer (see "Rotating the Hard

4 Rotate the processor access door to its open position.