Dell PowerEdge 2900 - Manual (Page 21)

About Your System
21
E1422 CPU Machine Chk The system BIOS has reported a
machine check error. See "Getting Help" on page 147.
E1610 PS # Missing No power is available from the
specified power supply; specified
power supply is improperly
installed or faulty. See "Troubleshooting Power
Supplies" on page 122.
E1614 PS # Status No power is available from the
specified power supply; specified
power supply is improperly
installed or faulty. See "Troubleshooting Power
Supplies" on page 122.
E1618 PS # Predictive Power supply voltage is out of
acceptable range; specified power
supply is improperly installed or
faulty. See "Troubleshooting Power
Supplies" on page 122.
E161C PS # Input Lost Power source for specified power
supply is unavailable, or out of
acceptable range Check the AC power source for
the specified power supply. If
problem persists, see
"Troubleshooting Power Supplies"
on page 122.
E1620 PS # Input Range Power source for specified power
supply is unavailable, or out of
acceptable range Check the AC power source for
the specified power supply. If
problem persists, see
"Troubleshooting Power Supplies"
on page 122.
E1624 PS Redundancy The power supply subsystem is no
longer redundant. If the last
supply fails, the system will go
down. See "Troubleshooting Power
Supplies" on page 122.
E1710 I/O Channel Chk The system BIOS has reported an
I/O channel check error. See "Getting Help" on page 147.
E1711 PCI PERR B## D##
F##
PCI PERR Slot #
The system BIOS has reported a
PCI parity error on a component
that resides in PCI configuration
space at bus ##, device ##,
function ##.
The system BIOS has reported a
PCI parity error on a component
that resides in PCI slot #.
Remove and reseat the PCI
expansion cards. If the problem
persists, see "Troubleshooting
Expansion Cards" on page 131.
If the problem persists, the
system board is faulty. See
"Getting Help" on page 147.
Table 1-6. LCD Status Messages (continued)
Code Text Causes Corrective Actions