Figure 6-1 for jumper location, Boot the system. see figure 6-1 for, Figure 6-1 shows the location of the configuration – Dell PowerEdge 2900 User Manual

Page 140: D. table 6-1 lists the

140

Jumpers and Connectors

Figure 6-1.

System Board Jumpers

Table 6-1.

System Board Jumper Settings

Jumper

Setting

Description

PWRD_EN

(default) The password feature is enabled.

The password feature is disabled.

NVRAM_CLR

(default) The configuration settings in NVRAM are retained at system

boot.

The configuration settings in NVRAM are cleared at next
system boot.