Dell PowerVault 770N (Deskside NAS Appliance) - Manual (Page 60)

NOTE: The default administrator user name is administrator and the default password is powervault.
5. Click the Start button and select Settings → Control Panel.
6. In the Control Panel, double-click Regional and Language Options.
7. On the Regional Options tab, select the appropriate region under Standards and Formats.
8. Click the Languages tab and select the appropriate language used in menus and dialogs.
9. Log off and log in to the system again for the new language MUI to take effect.
Network Adapter Teaming
Network adapter teaming allows the system to use the combined throughput of multiple network ports in parallel to increase
performance or to provide fault tolerance. Network adapter teaming on your NAS system supports the following technologies:
Adaptive Load Balancing (ALB)
Adapter Fault Tolerance (AFT)
Link Aggregation
Fast EtherChannel (FEC)
IEEE 802.3ad
NOTE: When creating or removing network adapter teams, the IP address of the NAS system's LAN connections changes.
To prevent disconnection from the NAS system during team configuration, connect a keyboard, monitor, and mouse to
the NAS system when creating or removing teams. See " Configuring Your System Using a Keyboard, Monitor, and Mouse "
in "Initial Configuration" before configuring your teams.
Adaptive Load Balancing
Adaptive Load Balancing (ALB) is a simple and efficient method for increasing the NAS system's network transmission
throughput. The ALB software continuously analyzes transmission loading on each adapter and balances the load across the
teamed ports as needed. Adapter teams configured for ALB also provide the benefits of adapter fault tolerance. To use ALB, the
Ethernet ports on the NAS system must be linked to the same Ethernet switch.
Adapter Fault Tolerance
Adapter Fault Tolerance (AFT) provides the safety of an additional backup link between the NAS system and the hub or switch. If
a hub, switch port, cable, or Ethernet port fails, you can maintain uninterrupted network performance. AFT is implemented with a
primary adapter and a backup, or secondary, adapter. If the link to the primary adapter fails, the link to the secondary adapter
automatically takes over.
Link Aggregation
Link aggregation is a performance technology developed by Intel® and others to increase a system's network throughput. Unlike
ALB, link aggregation can be configured to increase both transmission and reception channels between your system and switch.
Link aggregation works only with compatible Intel switches. To use link aggregation, the Ethernet ports of the NAS system must
be linked to the same Intel Ethernet switch.