Dell M5200 Medium Workgroup Mono Laser Printer - Manual (Page 82)

NOTE: Values marked by an asterisk (*) are the factory default settings.
Duplex
Purpose:
To set duplexing as the default for all print jobs. (Select Duplex from the printer driver to duplex only
specific jobs.)
The Duplex menu item is only available when a duplex option has been installed on the printer.
Values:
Off* Prints on one side of the paper.
On Prints on both sides of the paper.
See also:
Duplex Bind
Duplex Bind
Purpose:
To define the way duplexed pages would be bound, and how the printing on the back of the sheet (even-
numbered pages) is oriented in relation to the printing on the front (odd-numbered pages).
The Duplex Bind menu item is only available when a duplex option has been installed on the printer.
Values:
Long
Edge* Assumes binding along the long end of the page (left edge for portrait orientation and top
edge for landscape orientation).
Short
Edge Assumes binding along the short edge of the page (top edge for portrait orientation and left
edge for landscape orientation).
See also:
Duplex
Copies