Dell M5200 Medium Workgroup Mono Laser Printer - Manual (Page 31)

b.
Press Menu until you see Print Menus, and then press Select to print the page. The message
Printing Menus
appears on the display.
c.
Verify the duplex unit is listed under "Installed Features." d.
If it is not listed, turn the printer off, unplug the power cord, and reinstall the duplex unit. e.
Update your driver by following the instructions in the table. If the printer is on the network, update
the driver for each client. 3.
Windows XP Click Start Settings Printers and Faxes. 1.
Right-click the Dell Laser Printer M5200 icon. 2.
Click Properties Device (or Options) Update (or Update Now). 3.
Click OK OK. Close the Printers folder. 4.
Windows 2000
Windows NT 4.0
Click Start Settings Printers. 1.
Right-click the Dell Laser Printer M5200 icon. 2.
Click Properties Device (or Options) Update (or Update Now). 3.
Click OK OK. Close the Printers folder. 4.
Windows Me
Windows 95/98
Click Start Settings Printers. 1.
Right-click the Dell Laser Printer M5200 icon. 2.
Click Properties Device (or Features) Update (or Update Now). 3.
Click OK OK. Close the Printers folder. 4.
If Update is unavailable, follow these steps:
In the Available Options list, click Duplex Option. a.
Click Add. b.
Click OK, and then close the Printers folder. c.
If Update Now is unavailable, follow these steps:
In the Options list, find Duplex Option. a.
Change the setting from Not Installed to Installed. b.
Click OK, and then close the Printers folder. c.
To make duplexing the default for all print jobs:
You can set up your driver so the printer always duplexes unless you say otherwise for a particular job. This
is handy if you usually print on both sides of the page (to save paper, for example).
To make duplexing the default, follow the steps below.
For Windows XP only: Click Start Settings Printers and Faxes. 1.