Dell M5200 Medium Workgroup Mono Laser Printer - Manual (Page 102)

Assign Tray Assign Env Feeder Assign Man Env
Assign MP Feeder Assign Man Paper
Then select a value:
Off* Printer uses factory default source assignments.
0...199 Select a numeric value to assign a custom value to a source.
None Source ignores the Select Paper Feed command.
Other Tray Renumber selections:
View Factory Def Press Menu to display the factory default value assigned to each source.
Restore Defaults Select Yes to return all tray assignments to factory default values.
Auto CR after LF
Purpose:
To specify whether the printer automatically performs a carriage return after a line feed control command.
Values:
Off* Printer does not perform a carriage return after a line feed control command.
On Printer performs a carriage return after a line feed control command.
Auto LF after CR
Purpose:
To specify whether the printer automatically performs a line feed after a carriage return control command.
Values:
Off* Printer does not perform a line feed after a carriage return control command.
On Printer performs a line feed after a carriage return control command.
PostScript Menu