Dell M5200 Medium Workgroup Mono Laser Printer - Manual (Page 25)

Installing optional drawers
CAUTION: If you are adding an optional drawer sometime after setting up the printer, be
sure to turn the printer off, unplug the power cord, and disconnect all cables from the back
of the printer before completing these tasks.
To increase paper capacity, you can purchase optional 250-sheet and/or 500-sheet drawers. Optional
drawers attach under the printer and optional duplex unit. The printer automatically recognizes any drawer
that is installed.
A drawer consists of a tray and a support unit. The 250-sheet drawer and the 500-sheet drawer are installed
the same way.
Remove the tray from the support unit. Remove all packing material, tape, and decals. 1.
Place the support unit on top of the table or printer cabinet where you plan to use the printer. 2.
The tab, round peg, and square holes on top of any drawer help you position the support unit so the
edges are aligned properly. Make sure the support unit is securely in place.