Dell 2130cn Color Laser Printer - Manual (Page 23)

Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are performed by specifying the altitude of the
location where the printer is being used.
Values:
Reset Defaults
Purpose:
To initialize the NV (nonvolatile) memory for system parameters. After executing this function to automatically restart the printer, the menu parameters, or
data are reset to their default values.
Values:
Non-Dell Toner
When Non-Dell toner cartridge is used, the printer may be severely damaged and may not be covered by your warranty.
Purpose:
To specify whether or not to use another manufacturer's toner cartridge.
Values:
Auto Registration Adjustment
Off Does not perform color registration automatically.
On* Performs color registration automatically.
Auto Correct Click Start to perform color registration automatically.
Color Regi Chart Click Start to print a color registration chart.
Color Registration Adjustment
1 (Lateral)
Yellow
-9-
+9
Specifies lateral (perpendicular to paper feed direction) color adjustment values that are found in the color
registration chart individually for Yellow, Magenta, and Cyan.
0*
Magenta
-9-
+9
0*
Cyan
-9-
+9
0*
Color Registration Adjustment
2 (Process)
Yellow
-9-
+9
Specifies process (paper feed direction) color adjustment values that are found in the color registration
chart individually for Yellow, Magenta, and Cyan.
0*
Magenta
-9-
+9
0*
Cyan
-9-
+9
0*
Apply New Settings After you complete the settings, press the Apply New Settings button to apply the changes.
Restart printer to apply new settings Press the Restart printer to apply new settings button to apply the changes.
0 meter*
Specifies the altitude of the location where the printer is installed.
1000 meters
2000 meters
3000 meters
Apply New Settings After you complete the settings, press the Apply New Settings button to apply the changes.
Restart printer to apply new settings Press the Restart printer to apply new settings button to apply the changes.
Start Initializes system parameters.
Non-Dell Toner
Off* Disables the use of another manufacturer's toner cartridge.
On Enables the use of another manufacturer's toner cartridge.