Removing a card or blank – Dell Latitude D630 User Manual
Page 84

84
Using Cards
Removing a Card or Blank
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the
Product Information Guide.
NOTICE:
Click the
icon in the taskbar to select a card and stop it from
functioning before you remove it from the computer. If you do not stop the card in
the configuration utility, you could lose data. Do not attempt to eject a card by
pulling its cable, if one is attached.
Press the latch and remove the card or blank. For some latches, you must press
the latch twice: once to pop the latch out, and then a second time to pop the
card out.
This manual is related to the following products: