Dell PowerEdge 2650 - Manual (Page 12)

l Format Disk — Runs a utility that allows you to perform a low-level format on a hard drive. Most SCSI disk drives are formatted at the factory and do
not need to be formatted again. The Adaptec Format Disk utility is compatible with the majority of SCSI disk drives.
l Verify Disk Media — Runs a utility that allows you to scan the media of a hard drive for defects. If the utility finds bad blocks on the media, it prompts
you to reassign them; if you select Yes, those blocks are no longer used. You can press at any time to exit the utility.
Exiting SCSISelect
To exit SCSISelect, press until a message prompts you to exit. (If you changed any 78xx series host adapter settings, you are prompted to save the
changes before you exit.) At the prompt, select Yes to exit, and then press any key to reboot the system. Any changes that you made in SCSISelect take effect
after the system boots. (You can select No at the prompt if you are not ready to exit SCSISelect.)
Back to Contents Page