Dell OptiPlex GX1p - Manual (Page 34)

Back to Contents Page
See " Adding a Listed Card " for instructions.
If your Plug and Play or PCI expansion card is not
automatically configured when you reboot the system
with all other cards removed, you should contact the
manufacturer of the card or see "
Getting Help " in your
Diagnostics and Troubleshooting Guide.
WARNING: Boot Device conflict
detected! CSN=Card Select Number
Error=Error.
One of the devices is attempting
to use one or more resources
assigned to the system's boot
device. Perform the following procedure:
1. Start the ICU.
2. Identify the card marked config err.
This card is attempting to use one or more
resources required by the system's boot device.
3. Follow the procedure for the preceding error
message in this table.
NOTE:For the full name of an abbreviation or acronym used in this table, see the Glossary in the online System User's Guide.