beautypg.com

Dell Broadcom NetXtreme Family of Adapters User Manual

Page 140

background image

Fibre Channel Over Ethernet: Broadcom NetXtreme II® Network Adapter User Guide

file:///C|/Users/Nalina_N_S/Documents/NetXtremeII/English/fcoe.htm[9/5/2014 3:45:12 PM]

2. Select the device through which boot is to be configured.

NOTE: IMPORTANT: When running in NIC Partitioning (NPAR) mode, FCoE boot is supported only when the first function on each port is assigned an FCoE personality. FCoE boot

is not supported when the FCoE personality is assigned to any other function.

3. Ensure DCB/DCBX is enabled on the device. FCoE boot is only supported on DCBX capable configurations. As such, DCB/DCBX must be enabled, and the directly attached link peer

must also be DCBX capable with parameters that allow for full DCBX synchronization.

See also other documents in the category Dell Computer hardware: