Dell PowerEdge T310 - Manual (Page 163)

Troubleshooting Your System
163
10 Remove all expansion cards installed in the system. See "Removing an
Expansion Card" on page 118.
11 Close the system. See "Closing the System" on page 86.
12 Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
13 Run the appropriate online diagnostic test.
If the tests fail, see "Getting Help" on page 177.
14 For each expansion card you removed in step 10, perform the following
steps:
a Turn off the system and attached peripherals, and disconnect the
system from the electrical outlet.
b Open the system. See "Opening the System" on page 85.
c Reinstall one of the expansion cards.
d Close the system. See "Closing the System" on page 86.
e Run the appropriate diagnostic test.
If the tests fail, see "Getting Help" on page 177.
Troubleshooting the Processor
CAUTION:
Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
1 Run the appropriate online diagnostics test. See "Using Online
Diagnostics" on page 165.
2 Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet.
3 Open the system. See "Opening the System" on page 85.
4 Remove the cooling shroud. See "Removing the Cooling Shroud" on
page 88.
book.book Page 163 Wednesday, August 19, 2009 4:40 PM