Dell Acceleration Appliances for Databases - Manual (Page 80)

Example
This displays the names of the available ports, separated by spaces:
> ports –s
eth0 eth1 eth2 eth3 eth4 eth5 eth6 eth7
port:update
Updates a port.
Syntax
port:update [options] id
Options
--mode
<portMode> Mode for the port:
management
or
iscsi
or
cluster
Ports cannot be changed to or from cluster mode.
--ip-address
or
-ip
IP address to set for the port
--subnet-mask
or
-s
<value>
Subnet mask to set for the port
–-mode
Mode of the port. This can transition only between
ISCSI
and
MANAGEMENT
.
–-node
or
-n
Issue this command to one or more nodes in the cluster.
--cluster
Issue this command to all nodes in the cluster.
(See
help –-all
for details on all other options.)
Arguments
id The ID or UUID of the port to update
Example
This sets the port to management mode, with an IP address of 10.11.12.13:
> port:update –-mode management –-ip-address 10.11.12.13
80