Dell Acceleration Appliances for Databases - Manual (Page 70)

Example
This shows network address details:
> network:ping 192.168.20.49
PING 192.168.20.49 (192.168.20.49) 56(84) bytes of data.
64 bytes from 192.168.20.49: icmp_seq=1 ttl=64 time=0.031 ms
64 bytes from 192.168.20.49: icmp_seq=2 ttl=64 time=0.010 ms
64 bytes from 192.168.20.49: icmp_seq=3 ttl=64 time=0.017 ms
--- 192.168.20.49 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 1998ms
rtt min/avg/max/mdev = 0.010/0.019/0.031/0.009 ms
NODE COMMANDS
The Node commands enable you to list or get information for network nodes.
node:get
Retrieves detailed information on a node. If no node is specified, information about the current
local node is returned.
Syntax
node:get [options] id
Options
–-node
or
-n
Issue this command to one or more nodes in the cluster.
--cluster
See
–-urlList
above.
(See
help –-all
for details on all other options.)
Arguments
id
The ID or UUID of the node to get information for
Example
This gets information on
ionr8i48
:
> node:get ionr8i48
Id ionr8i48
UUID 16885952
70