beautypg.com

Hardware description, Port side – Dell POWEREDGE M1000E User Manual

Page 14

background image

4

M5424 SAN I/O Module Hardware Reference Manual

53-1001082-01

Hardware Description

1

Hardware Description

This section describes the physical SAN I/O Module as shipped from the factory. For specifications,
such as installed memory, weight and physical dimensions, facility requirements, architectural
specifications, and regulatory compliance, refer to

Appendix A, “SAN I/O Module specifications”

Port side

Externally accessible ports and LEDs are on the port side of the SAN I/O Module. The port side
faces out when the SAN I/O Module is inserted into the I/O bay of the Blade Server enclosure.

Figure 1

details the port side. For a complete description of the locations and interpretations of

these LEDs, see

“Interpreting LED activity”

on page 22.

Access the I/O module handle at the front of the port side of the SAN I/O Module. By lifting the
handle’s release latch, you can open the handle to remove and insert the unit from the Blade
Server Enclosure.

FIGURE 1

Port side view

1. Ports with port status and port speed LEDs

2. RJ45 console port

3. SAN I/O Module status LED

4. Power status LED

5. Server management LED

6. SAN I/O Module handle

The nonport (SAN I/O Module status) LEDs, shown as item 3 of

Figure 1

, display SAN I/O

Module-level information as shown in

Figure 2

.

FIGURE 2

Other status LEDs

1

2

3

4

5

6

1

2

3

4

5

6

1

2

3