beautypg.com

Installing the tower trim panel – Dell PowerEdge 2800 User Manual

Page 25

background image

Tower-to-Rack and Rack-to-Tower Conversion Guide

23

Figure 1-12.

Removing the System

Installing the Tower Trim Panel

1

Lay the system on its cover as shown in Figure 1-13.

2

Position the tower trim panel with the back end extending 12.7 millimeters (0.5-inch) beyond
the back of the chassis. See Figure 1-13

3

Slide the trim panel toward the front panel until it stops.

4

Using a #2 Phillips screwdriver or 1/4-inch nut driver, install the two screws that secure the
trim panel to the back of the chassis.

5

Using a #2 Phillips screwdriver or 1/4-inch nut driver, install the three screws that secure the
trim panel to the side of the chassis.

system locking mechanism

system locking
mechanism release button

Y1001bk0.book Page 23 Thursday, July 8, 2004 4:32 PM

See also other documents in the category Dell Computer hardware: