beautypg.com

Dell PowerEdge 2800 User Manual

Page 15

background image

Tower-to-Rack and Rack-to-Tower Conversion Guide

13

Figure 1-5.

Drive Tray in Maintenance Position

2

Remove the control panel assembly.

a

Orient the system as shown in Figure 1-6.

b

Disconnect the control panel cable from the SCSI backplane.

c

Inside the drive tray, open the control panel cable clamp. See Figure 1-6.

d

Using a #2 Phillips screwdriver, remove the three screws that secure the tower control
panel assembly to the front panel.

e

Slide the control panel assembly back away from the front panel and remove the assembly
and cable from the chassis.

NOTE:

While removing the control panel assembly, be careful not to damage the interface cable.

captive screw

drive tray
release lever

Y1001bk0.book Page 13 Thursday, July 8, 2004 4:32 PM

See also other documents in the category Dell Computer hardware: