System board connectors, Table a – Dell PowerEdge SC 430 User Manual
Page 3
Table A-1. System Board Jumper Settings
System Board Connectors
for the location and description of system board connectors.
also indicates expansion slots and bus operating speeds.
Figure A-3. System Board Connectors
Table A-2. System Board Connectors
Jumper
Setting
Description
PSWD
(default)
The password feature is enabled.
The password feature is disabled.
RTCRST
(default)
The configuration settings in NVRAM are retained at system boot.
The configuration settings in NVRAM are cleared at next system boot.
Connector
Description
AUX_LED
External LED connector
AUX_PWR_LED
Auxiliary power LED.
BATTERY
System battery
CARD CAGE COOLING FAN
Card-cage cooling fan
DIMM_x
Memory modules (4)
FAN_CPU
Processor fan connector
FLOPPY
Floppy drive
FRONT PANEL
Front-panel switches and indicators
I/O expansion cards
Expansion card slots:
l
one PCI Express [x8]
l
one PCI Express [x1]
l
one PCI Express [x4]
l
two 32-bit/33-MHz PCI
IDE
IDE drive connector
INTRUDER
Chassis intruder switch
POWER P1
Main power connector
POWER P2
Power connector (small)
PSWD
.
RTCRST
.