Dell Latitude C800 - Manual (Page 29)

Installing Network Adapter Drivers for Windows NT ®
1. Save your work in all open application programs.
2. Insert the Drivers and Utilities CD into the CD or DVD drive.
3. Click the Start button, and then click Run.
4. In the Run window, type the following line:
x:\start.htm
where x is your CD drive letter.
5. Click to select the appropriate language.
6. Click All Software.
7. Under Name, click the link to the device you are installing.
8. Under Installation Instructions , make a note of the path in the CD Directory link. For example:
comm.\R18322
9. Click the CD Directory link.
10. Double-click Drivers.
11. Double-click Lan.
12. Double-click NT_Softex_APM.
13. Double click setup.exe.
14. When the installation is complete, click No, I will restart my computer later.
15. Click Finish.
16. Click the Start button, point to Settings, and click Control Panel.
17. In the Control Panel window, double-click the Network icon.
18. In the Network window, click Adapters.
19. Click the Add... button, and then click the Have Disk... button.
20. In the Have Disk window, type the following line:
x:\path\Drivers\LAN\Win95_NT
where x is your CD drive letter and path is the path in the CD Directory link.
21. Click OK.
22. Verify that the correct device to be installed is highlighted and click OK.
23. In the Setup window, click OK.
24. In the Network window, click Close.
25. In the Microsoft TCP/IP Properties window, select the device you are installing in the Adapters field. Complete the IP address information
as directed by your network administrator. Click OK.
26. Click Yes to restart your computer with the Drivers and Utilities CD in the CD or DVD drive.
Installing Internal Modem Drivers for Windows NT
NOTE: Check with your network administrator about how to set up the Microsoft TCP/IP Properties window for your computer before
performing the following procedure.