Dell PowerVault 715N (Rackmount NAS Appliance) - Manual (Page 15)

To replace the bezel, push the levers inward and push the bezel onto the front of the system.
System Cover
The system has a cover that provides access to system board components and the PCI expansion card. To service the
system, remove the cover to gain access to internal components.
System Cover Removal
CAUTION: See the safety instructions in your System Information booklet before working inside your
system.
1. Push the latches on the top of the system inward (see Figure 2 ).
2. Slide the system cover backward about 16 mm (0.6 inch) until the embossed arrowheads on the sides of the cover
and chassis are aligned (see Figure 2 ).
3. Carefully lift the cover away from the system.
Figure 2. System Cover Removal
1 Cover
2 Latches (2)
3 Arrowheads aligned for
removal