Dell XPS M1730 (M1730, Late 2007) - Manual (Page 49)

Palm Rest 49
12
Palm Rest
Removing the Palm Rest
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove any installed ExpressCards from the ExpressCard slot.
3 Remove any installed memory modules or Mini Cards (see "Memory" on
page 19 and "Communication Cards" on page 31).
4 Remove the hard drive (see "Hard Drive" on page 15).
5 Remove the display assembly (see "Display Assembly" on page 37).
6 Turn the computer upside down and remove the fourteen screws from the
computer base.