Dell POWEREDGE M1000E User Manual

Page 220

218

Guia de Primeiros Passos

. Return later and setup other SNMP accounts. (For

more information on setting up an SNMP version 1

or 3 account, see the user documentation).

Would you like to setup the SNMP management interface

now? [Y/N]

Step 2:

Now we need to setup your initial privilege (Level 15)

user account. This account is used to login to the CLI

and Web interface. You may setup other accounts and

change privilege levels later. For more information on

setting up user accounts and changing privilege

levels, see the user documentation.

To setup a user account:

Please enter the user name. [root]:

Please enter the user password:

Please reenter the user password:

Step 3:

Next, IP addresses are setup on the OOB (Out-Of-Band)

Interface and/or the VLAN 1 routing interface.

You can use these IP addresses to access the CLI, Web

interface, or SNMP interface of the switch.

To access the switch through any Management Interface

you can

. Setup the IP address for the Management Interface.

. Setup the default gateway if IP address is

manually configured on both routing and OOB

interface.

Would you like to setup the Out-Of-Band interface now?

[Y/N]