Dell POWEREDGE M1000E - Manual (Page 198)

196 | הדובעה תליחת ךירדמ
Would you like to setup the SNMP management interface
now? [Y/N]
n
Step 2:
Now we need to setup your initial privilege (Level
15) user account. This account is used to login to
the CLI and Web interface. You may setup other
accounts and change privilege levels later. For more
information on setting up user accounts and changing
privilege levels, see the user documentation.
To setup a user account:
Please enter the user name. [root]:
Please enter the user password:
Please reenter the user password:
Step 3:
Next, IP addresses are setup on the OOB (Out-Of-Band)
Interface and/or the VLAN1 routing interface.
You can use these IP addresses to access the CLI, Web
interface, or SNMP interface of the switch.
To access the switch through any Management Interface
you can
. Setup the IP address for the Management
Interface.
. Setup the default gateway if IP address is
manually configured on both routing and OOB
interface.
Would you like to setup the Out-Of-Band interface
now? [Y/N]
y