Dell POWEREDGE M1000E - Manual (Page 197)

ךירדמ הדובעה תליחת | 195
המגודה האבה הליכמ תא צר תויחנהה תובוגתהו תוכיושמה תלעפהל המגודה לש שא
הנקתהה
Dell Easy Setup
, ות שומיש יכרעב טלקה יטרופמה ליעל .
רחאל תמלשה תקידב
POST
לוחתאו גתמה , גצוי טסקטה אבה :
(Unit 1 - Waiting to select management unit)>
Applying Global configuration, please wait ...
Welcome to Dell Easy Setup Wizard
The Setup Wizard guides you through the initial
switch configuration, and gets you up and running as
quickly as possible. You can skip the setup wizard,
and enter CLI mode to manually configure the switch.
You must respond to the next question to run the
setup wizard within 60 seconds, otherwise the system
will continue with normal operation using the default
system configuration. Note: You can exit the setup
wizard at any point by entering [ctrl+z].
Would you like to run the setup wizard (you must
answer this question within 60 seconds)? [Y/N]
y
First:
Do you want to select the operational mode as Simple
Mode? [Y/N]
y
Step 1:
The system is not setup for SNMP management by
default. To manage the switch using SNMP (required
for Dell Network Manager) you can
. Set up the initial SNMP version 2 account now.
. Return later and setup other SNMP accounts. (For
more information on setting up an SNMP version 1
or 3 account, see the user documentation).