Dell POWEREDGE M1000E User Manual

Page 34

使用入门指南

交换机完成 POST 并引导后，将显示以下文本信息：
(Unit 1 - Waiting to select management unit)>

Applying Global configuration, please wait ...

Welcome to Dell Easy Setup Wizard

The Setup Wizard guides you through the initial switch

configuration, and gets you up and running as quickly

as possible. You can skip the setup wizard, and enter

CLI mode to manually configure the switch. You must

respond to the next question to run the setup wizard

within 60 seconds, otherwise the system will continue

with normal operation using the default system

configuration. Note: You can exit the setup wizard at

any point by entering [ctrl+z].

Would you like to run the setup wizard (you must

answer this question within 60 seconds)? [Y/N]

First:

Do you want to select the operational mode as Simple

Mode? [Y/N]

Step 1:

The system is not setup for SNMP management by

default. To manage the switch using SNMP (required for

Dell Network Manager) you can

. Set up the initial SNMP version 2 account now.

. Return later and setup other SNMP accounts. (For

more information on setting up an SNMP version 1

or 3 account, see the user documentation).

Would you like to setup the SNMP management interface

now? [Y/N]

Step 2:

Now we need to setup your initial privilege (Level 15)
user account. This account is used to login to the CLI
and Web interface. You may setup other accounts and
change privilege levels later. For more information on
setting up user accounts and changing privilege
levels, see the user documentation.