Dell Latitude D531 (Mid 2007) - Manual (Page 128)

128 Before You Begin
Removing the Device Security Screw
If the device security screw is installed, you must remove the screw to remove the device from the bay:
1 Save and close any open files, exit any open programs, and shut down the computer.
2 If the computer is connected to a docking device (docked), undock it. See the documentation that
came with your docking device for instructions.
3 Close the display and turn the computer over.
4 Use a #1 Phillips screwdriver to remove the device security screw from the bottom of the computer.
Removing and Installing Media Bay Devices
NOTICE: When removing or installing a device, avoid dropping the device as this may damage the drive. Store the
device in a safe, dry place when it is not installed in the computer. Avoid pressing down on the device or placing
heavy objects on top of it.
NOTE: If your computer shipped with a device security screw and the screw is not installed, you can remove and
install devices while the computer is running and connected to a docking device.
1 If you are swapping a device while the computer is turned on, double-click the Safely Remove Hardware
icon on the taskbar, click the device that you want to eject, and click Stop.
If you are swapping a device while the computer is turned off, proceed to the next step.
2 If your computer shipped with a device security screw and the screw is installed, remove it (see "About
the Device Security Screw" on page 127).
3 Press the device latch release.
1 device security screw 2 device latch release
1
2