Scsi backplane connectors, Disabling a forgotten password, Figure a – Dell PowerEdge 1850 User Manual
Page 5
Figure A-6. Optional ROMB PCI-Express Riser Card (when available)
SCSI Backplane Connectors
for the location and description of the connectors on the SCSI backplane board.
Figure A-7. SCSI Backplane
Disabling a Forgotten Password
The system's software security features include a system password and a setup password, which are discussed in detail in "Using the System Setup Program"
in your User's Guide. The password jumper enables these password features or disables them and clears any password(s) currently in use.
1.
Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
2.
Open the system. See "
Opening the System
" in "Troubleshooting Your System."
3.
Remove the password jumper plug.
to locate the password jumper on the system board.
If necessary, remove the riser card insulator to improve access to the jumper. See "
Removing the Riser Card
" in "Installing System Components."
CAUTION:
See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting
against electrostatic discharge.