Dell 1600n Multifunction Mono Laser Printer - Manual (Page 91)

I n s t a l l i n g O p t i o n s 8 1
5 Connect the cable into the connector on the back of the multi-function printer.
6 Load paper in the optional Tray 2. For information about loading paper in this tray, see
page 27.
7 Reconnect the power cord and cables and then power the multi-function printer on.
When you print a document on paper loaded in the optional Tray 2, you must configure the
properties of the printer driver.
To access the properties of the printer driver:
1 Click the Windows Start button.
2 For Windows 98/Me/NT 4.0/2000, click Settings and point to Printers.
For Windows XP/Server 2003, click Printers and Faxes.
3 Click the Dell Laser MFP 1600n printer.
4 Right-click the printer icon and:
In Windows 98/Me, click Properties.
In Windows 2000/XP/Server 2003, click Print Setup or click Properties and then point
to Printing Preferences.
In Windows NT 4.0, click Document Default.
5 Click the Printer tab, and select Tray 2 from the Optional Tray drop-down list.
6 Click OK and print the document.