Installing an optional tray 2, Removing the memory – Dell 1600n Multifunction Mono Laser Printer User Manual
Page 89
I n s t a l l i n g O p t i o n s
7 9
Removing the Memory
1
Follow steps 1 and 2 on page 76 to access the control board.
2
Push the levers at both ends of the DIMM slot away from the DIMM.
3
Place the DIMM in its original packaging or wrap it with paper and store it in a box.
4
Follow from step 8 on page 78.
Installing an Optional Tray 2
You can increase the paper handling capacity of your multi-function printer by installing an
optional Tray 2. This tray holds 250 sheets of paper.
1
Power the multi-function printer off and unplug all cables from the multi-function
printer.
2
Remove the packing tape and the tape fastening the interface cable from the bottom
of the optional Tray 2.