Canon GM-1000 - Manual (Page 7)

CANON Digital Galvano Scanner System GM-1000 Series
Users Manual 1.20
7
2.2. Controller (GC-201)
Performance and Dimensions
GC-201
Number of control axes 2
Control sampling 100 kHz
Maximum drive current Peak 10 A (each axis)
Interface RS-232C , High-speed serial communication(XY2-100)
Notch filter
Digital notch filter ×2
Digital low-pass filter ×1
Analog notch filter ×2
Weight 350 g
Environmental conditions
Operating temperature and humidity 0 to 50ºC, 90% RH or less (No condensation)
Storage temperature and humidity -20 to 60ºC, 90% RH or less (No condensation)
Note: The above operating temperature and humidity conditions depend on the operating and heat
radiation conditions.
Section names
Heat radiation
frame
Mounting screw
hole (M3 × 4)
Digital board (upper)
Analog board (lower)
IF board
Mounting screw
hole (φ3.5 Ч 4)