Corega CG-WLNCM4G - Manual (Page 31)

29
CG-WLNCM4G User Manual
Please first select [Enable] to enable the wirelss function.
• Network ID (SSID): Click [Site Survey] to display the available
wireless networks. Please double click the ESSID which you would
like to connect from the Site Survey list.
• Wireless Mode: Select the type of wireless communication for the
camera, either Infrastructure or Ad-Hoc. (Please select Infrastructure
if you connect this camera to an Access Point or a wireless router.)
• Channel: Select the appropriate channel from the list.
All of the wireless security settings, such as Authentication, Encryption,
key, etc., should be same as the remote device which you would like
to connect.
3.3 Video / Audio
3.3.1 Camera
Here you can modify the image settings in terms of brightness,
contrast, and saturation. You can also change the Light Frequency
according to the lighting conditions of the camera’s location. By
choosing “Outdoor” mode, you can avoid over-exposure in an outdoor
sunny environment.