Corega CG-WLNCM4G - Manual (Page 29)

27
CG-WLNCM4G User Manual
service provider. Please also enter the user name and password here.
The camera will get an IP address from the ISP as starting up.
Please note that once the camera gets an IP address from the ISP
as starting up, it automatically sends a notification email to you.
Therefore, you have to set up the email or DDNS configuration in
advance when using PPPoE.
DDNS Setting:
With the Dynamic DNS feature, you can assign a fixed host name
and domain name to a dynamic Internet IP address. Select [Enable]
to enable this feature and select your preferred provider from the
pull-down list. Enter the required information in the Host Name, User
Name, and Password boxes. Please note that you have to sign up for
DDNS service with a service provider first in order to use this feature.
UPnP:
The camera supports UPnP (Universal Plug and Play), which is a set
of computer network protocols that enable the device-to-device
interoperability. In addition, it supports port auto-mapping function
so that you can access the camera if it is behind a NAT router or
firewall. Select [Enable] to enable this feature.
Ports Number:
• HTTP Port: The default HTTP port is 80.
NOTE: If you have a second camera in the same sub-network,
you should assign a different HTTP port to the second camera, for