8 snmp community names screen, Snmp community names screen -22, Section 5.8 – Cabletron Systems DLE22-MA User Manual
Page 86: O section 5.8, O section 5
Chapter 5: Local Management
5-22
DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide
5.8
SNMP COMMUNITY NAMES SCREEN
The SNMP Community Names menu item allows the user to set Local
Management community names. Community names act as passwords to
Local/Remote Management and provide security access to the
DLM6C-AA. Access to the DLM6C-AA is controlled by enacting any of
three different levels of security authorization (read-only, read-write, and
super-user).
Access the SNMP Community Names screen from the Chassis Menu
screen by using the arrow keys to highlight the SNMP COMMUNITY
NAMES menu item and pressing ENTER. The SNMP Community
Names screen, Figure 5-10, displays.
If the DLE2X-MA and DLE3X-MA have been set to 802.1Q
SWITCHING, refer to your Port Based VLAN User’s Guide to
configure the devices for this type of operation.
Super-User access gives the user full management privileges,
allows existing passwords to be changed, and all modifiable
MIB objects for the Cabletron Container MIB and Internet
MIB-II to be edited.